To request proposals or purchase FYBROC® pumps, contact us using this form:
Int. Class 007-Centrifugal pumps.
Our Fybroc® brand is the world leader in the design and manufacture of Fiberglass Reinforced Polymer (FRP) pumps. These pumps are available in different materials to provide excellent corrosion resistance for tough applications, including the pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids.
Steam Atomized Split Flame® Atomizer
The air or steam atomized, Split Flame® atomizer is of the internal mix design and comprises the spray plate, back plate or plug and retaining nut. Fuel enters the back plate or plug in the outer ring of holes, the oil changes direction by 90 at the outlet of the back plate and is directed towards the center of the plug through a series of radial slots where the oil is sheared by the atomizing steam passing through the inner ring of holes. Reversal of the oil and atomizing steam orientation is possible depending upon the application. The oil/ steam mix enters the mixing chamber of the spray plate and exits as angled sectors from graduated size orifices. The number of sectors is determined by the specific application. The Split Flame® atomizer can be designed as part of a new oil gun assembly, or it can be retrofitted to most existing oil guns.
Pressure Atomized Split Flame® Atomizer
The pressure atomized Split Flame® atomizer, which can be used on either the “once through” or simplex system or the spill return system, is of the pressure-atomized design and comprises a spray plate, back plate and retaining nut. On the simplex system, oil enters the back plate at high pressure through the outer ring of holes, changes direction by 90 degrees at the outlet of the back plate and is directed towards the center of the plug through a series of whirl slots. The oil enters a conical shaped whirl chamber with a high degree of rotational energy at the rear of the spray plate and exits through a circular orifice at the outlet of the cone. A slot milled at the outlet orifice creates the outlet divided spray pattern. The number of slots is determined by the specific application.
The spill return system operates with more fuel oil being flowed to the atomizer than is required for combustion. The oil enters and exits the outer ring of holes in the back plate, passes through the whirl slots into the conical spray plate chamber as with the simplex system. The excess oil not required for combustion returns through the inner ring of holes in the back plate, where a valve external to the oil gun controls the oil flow. The Split Flame® concept can be adapted to virtually any OEM oil gun.
North and South America
14651 Dallas Parkway
Dallas, TX 75254
USA Phone: 214-357-6181
Toll Free: 800-333-5475
P.O. Box 65
Phone: +31 341 252 635
Fax: +31 341 262 112
Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road