Market: Defense, Marine & Aerospace

Demineralization by Ion Exchange Resin

Demineralization by Ion Exchange Resin

Peerless Water

Demineralization (IOX) is based on chemical properties that form the ion exchange resins, synthetic origin polymeric roots. Those resins are supplied with active functional groups, bonded to the sources that can exchange their moving ions with ions having the same charge contained in the solutions when water pass the IOX bed.

The Dementalization process is a cyclic process, thus, regeneration using acid & caustic soda is required at a specific frequency based on the ionic load, ion exchange quantity and flow rate. The standard system consists of Pretreatment to ensure feed water TSS is less than < 5 ppm, with a wide range of feed water conductivity up to 1,000 μm, two mono beds (SAC & SBA) followed by a mixed bed. Based on the feed water quality, a degasifier might be considered between the mono bids to reduce carbon dioxide load.

Request info  

FEATURES & BENEFITS

  • Cost-effective operation and maintenance with an ionic load less than 500 μm
  • Low power consumption
  • Reliability & Robust
  • Provides complete removal of dissolved inorganic particles
  • Handle a wide range of raw water sources & quality
CECO Environmental

APPLICATIONS

  • Steam generation for petrochemical, chemical
  • Oil & gas industries
  • Injection water for pharmaceutical and autoclave steam disinfection
  • Steam generation for combined cycle power plants and thermal power plants
  • Food and beverage specialty and the wine industries
  • Semi-conductor industries

Demineralization by Electro Deionization

Demineralization by Electro Deionization

Peerless Water

The electro-deionization (EDI) process mainly produces (demineralized) high-purified water required for different industries, combining semi-impermeable membrane technology with ion-exchange media. The electrical current is used to continuously regenerate the resin, eliminating the need for using harsh chemicals required for the regeneration of ion exchange resin. The EDI technology used to produce high-purified water (< 0.01 µm) mainly for the following industries

Request info  
CECO Environmental

APPLICATIONS

  • Steam generation for petrochemical, chemical, oil, and gas industries
  • Injection water for pharmaceutical and autoclave steam disinfection
  • Steam generation for combined cycle power plant, thermal power plants
  • Food and beverage specifically within the win industries
  • Semi-conductor industries

Custom Environmental Control in Metal Industry Electrical Equipment Rooms

Custom Environmental Control in Metal Industry Electrical Equipment Rooms

Busch

Engineers in the metals industry commonly design ventilation systems for electrical equipment rooms. The areas of most concern are rolling mill motor room ventilation, transformer vaults, power control rooms, computer rooms, and pulpits. Busch offers deep expertise in custom designs to achieve environmental control and cooling ventilation in these rooms. We understand that the primary objectives in designing a ventilation system for electrical equipment are to provide an environment that will:

  • Extend equipment life
  • Allow the equipment to operate at maximum efficiency at its rated capacity, with maximum uptime

The most successful methods of ventilation of large electrical equipment enclosures in the metal industry include:

  • Self-cleaning, high-efficiency filters
  • Packaged ventilation units with capacities as high as 250,000 CFM
  • Advanced corrosion protection systems
  • Improved heating and cooling technologies

Custom designs are needed to meet the unique ventilation requirements associated with electrical equipment. Simply purchasing ventilation components through an installing contractor or equipment supplier will result in several problems that stem from the unique ventilation requirements.

Custom Environmental Control from Busch

Busch over the last 70 years has remained the global leader in the design and installation of custom, top-of-the-line clean air solutions. In Primary Metals facilities, Busch equipment is without equal. Recognized for providing the “Best Available Control Technology” to capture, collect, and convey emissions from steel and aluminum rolling mills, our products and customer service set us apart from other brands. Providing custom environmental control for metal industry electrical equipment rooms is just one example of Busch’s outstanding technology.

Updating your company with cutting-edge systems from Busch will move your facility into the future. Busch provides adaptable, customized technology to fulfill your particular needs. Purchase Busch equipment with absolute confidence and the knowledge that it is state-of-the-art and will perfectly fit your requirements.
While Busch specializes in the primary metals industry, we are also experts in designing and installing hardware for the chemical, automotive, power generation, and glass industries. Busch has you covered whether you need new air cleaning machinery, heavy-duty ventilation equipment, or high-capacity cooling systems. Go with Busch and see why we have been the global leader in air cleaning solutions for over 60 years.

Keep your emissions as clean as your conscience. Choose Busch.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Low Total Cost of Ownership
  • Sufficient quality of ventilation air for equipment cooling or personnel stress relief
  • High performance and low maintenance requirements of air filter systems
  • Minimized corrosion of sensitive equipment due to condensation or airborne contaminants
  • Use of correct airflow distribution patterns
  • Low noise levels

CT Series High Pressure/High Vacuum Dust Collector

CT Series High Pressure/High Vacuum Dust Collector

Flex-Kleen

Flex-Kleen CT Series High Pressure/High Vacuum Dust Collecting Systems are designed to operate in process system environments with minimal maintenance and personnel effort. Applying over six decades of experience and knowledge, we deliver highly efficient dust collector solutions designed for optimal performance, reliability and durability, while meeting the most stringent environmental compliance standards across the globe.

Each dust collecting system is manufactured to fit your application specific requirements, with premium quality construction materials including stainless steel, special alloy, FRP, and sanitary construction for ASME (American Society of Mechanical Engineers) code pressure vessel service.

Flex-Kleen is a world leader in technologies that help companies with emission control. International companies use Flex-Kleen technology to manage emissions by controlling dust and recover valuable particulates that would otherwise be lost, with innovative hardware like the CT Series high pressure/high vacuum dust collection system. Our passion drives our success. Crafting advanced and reliable air control technology for our customers is what we pour our hearts and minds into, and it shows. Let Flex-Kleen help you develop the solution to your problem, as we have since 1959.

Because they trust our engineering and manufacturing processes to fill their needs, Flex-Kleen products are found in some of the world’s cutting-edge companies. Our people build products to help your business thrive. We work with you from conception to completion because they are as dependable as our products. We can provide installation and maintenance of your dust collection solution to let you focus on hitting your targets for peak production and maximum profitability. Let Flex-Kleen become a partner in your company’s success.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Low Total Cost of Ownership
  • High-efficiency performance
  • Easy installation with pre-assembled units
  • High-quality and reliable models designed to satisfy USDA (U.S. Department of Agriculture) standards
  • Time and cost savings with minimal and easy maintenance and no internal moving part
  • 40″ to 100″ W.G. or 17″ Hg (pressure or vacuum)
  • Individual units to 40,000 cfm, multiple units available
  • Easy bag replacement
  • Easy installation
  • Minimum maintenance
  • Simple control
  • Inlet baffle to protect bags from abrasive dusts
  • Dusty air inlet and clean air outlet easily oriented to meet user requirements
  • Quick access door(s) to dusty and clean sides of the collector on negative pressure units
  • Bolted door(s) to dusty and clean sides of the collector for positive pressure units
  • External compressed air reservoir (shipped complete, with pre-wired solenoid valves, ready to mount)
  • A wide variety of bag materials to suit specific needs
  • Flush tube sheet in the clean air plenum
  • Solid-state adjustable sequencing timer in standard dust-tight housing
  • Saddle supports located to match user’s support steel

CR Series – Chromic Acid Disc Filter Systems

CR Series – Chromic Acid Disc Filter Systems

Mefiag

Our Mefiag CR Series – Chromic Acid Disc Filter Systems are special filtration units of polyvinylidene difluoride (PVDF) lined or solid PVDF construction. These units, which feature horizontal disc technology and capacities from 800 to 6,500 gph, are specifically for use in processes where chromic acid is involved (hard chromium, etching, etc.)

Since its founding in 1953, Mefiag has established itself as an international leader in the design, manufacture, and delivery of matchless filter solutions. Our advanced filtration and pump products rise above the competition in the plating, metal finishing, and anodizing industries. Mefiag systems excel in the toughest of conditions. When the work is hard, our filters work harder.

Mefiag offers the most versatile products on the market. Along with our filtration solutions for electroplating, pumps and filters are installed in numerous industries worldwide. Companies rely on our CR Series-Chromic Acid Disc Filter Systems that are built specifically for processes involving chromic acid. As our industry expertise has expanded, one thing remains constant: our commitment to supplying reliable and efficient systems for our clients. When you choose a Mefiag system for your filtration requirements, you are assured peace of mind.

At Mefiag, we are proud of our success. From day one, we are dedicated to creating exceptional products for exceptional people. When superior performance is your goal, then you can trust Mefiag to bring your company the excellence and reliability it deserves. For the optimum filtration solution, choose Mefiag.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Designed for the filtration of chromic acid solutions including etching of ABS
  • Operating temperatures to 180°F (82°C)
  • For plating tanks from 400 to 3,300 gallons (about 12,500 L)
  • Can be supplied with horizontal discs or cartridges depending on the application
  • Low Total Cost of Ownership
  • Horizontal disc technology for greater surface area and maximum efficiency
  • Mechanical lifting device for easy access to filter pack
CECO Environmental

APPLICATIONS

  • Automotive
  • Construction
  • Sanitary
  • Plating
  • Anodizing
  • Metal Finishing
  • Labs
  • Small Plating Tanks

CLARI-SEP®

CLARI-SEP®

Wash Water Separator is capable of treating waste water generated from the cleaning of machinery and equipment, separating free oil and dirt from the water making it suitable for sewer discharge.* The process used include aeration, gravity separation, solids separation, oil coalescing, ozone disinfection and oxidation.

The CLARI-SEP® is designed for installation in either indoor or outdoor locations and is supplied with drain lines and valves to prevent freeze damage. An optional immersion heater is also available for installation in the separator tank. The pumps are designed and sized for optimum operating conditions to provide water suitable for sanitary discharge from a typical pressure-washer wash bay.

The CLARI-SEP® is capable of processing up to 15 gallons per minute of wash water through the separation, filtration and disinfection components. The CLARI-SEP® removes free oil and hydro-carbons (one micron and larger in size), dirt, sand and grit (down to 50 microns in size) and provides constant recirculation with ozonation for bacteria control.

* NOTE: “suitable for sewer discharge” is defined as the allowable discharge limits in your local area.

Request info  

FEATURES & BENEFITS

  • Unitized skid design is compact and simplifies installation
  • Unit is pre-wired, pre-piped to minimize installation time and costs
  • Corrosion resistant construction throughout reduces maintenance and extends system service life
  • Permanent coalescing matrix eliminates the need for and disposal associated with replaceable filters
  • Heavy-duty industrial components offer enhanced durability reducing maintenance costs
  • Open design allows for easy access for routine maintenance and periodic inspection
  • Lockable control panel is protected by weather resistant case and minimizes unauthorized access

Circular Attenuator

Circular Attenuator

Wakefield Acoustics designs, manufactures and installs circular attenuators to suit most air and gas movement applications.

CIRCULAR SILENCERS
Whether the application is for small circular silencers used within dust extraction systems or for large industrial air fans or blowers our selection data is applicable to all.

Wakefield Acoustic offers a multitude of attenuator designs and constructions.

Our products can be fabricated from pre-galvanized or stainless steel sheet with sealed external casings. Where subject to high pressures, or a low level of leakage is required, casings would be formed from thicker steel plate, fully welded. Wakefield Acoustics is able to offer various forms of NDT testing and pressure testing of our products.

Along with our circular attenuators we are also able to supply a variety of weather hoods and cowls where required.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Light gauge pre-galvanized steel or stainless steel sheet casings and proprietary flanges
  • Heavy plate welded construction in mild steel or stainless steel 304 and 316L
  • Melinex moisture-resistant membrane for damp process air
  • Transition pieces
  • Weather cowls
  • VARIOUS FINISHED INCLUDING
    • Polyester powder coated
    • Epoxy paint
    • Various wet paint systems

Centrifugal Exhaust Fans

Centrifugal Exhaust Fans

HEE-Duall

Each of our HEE-Duall Centrifugal Exhaust Fans are custom engineered to deliver maximum performance, efficiency and durability, even in the harshest applications. We are a leading provider of corrosion resistant fans for industrial and municipal applications, which are manufactured from fiberglass reinforced plastic (FRP) materials and glass.

No matter which model you choose – HPC or HPCA – our fans offer premium vinyl ester resin and glass systems, providing years of trouble-free service and value. Our fans also offer a streamlined inlet cone, outlet recovery vanes plus clockwise and counterclockwise rotation.

The FRP Fan Models HPC and HPCA are licensed to bear the AMCA seal for air performance.

The CECO HEE-Duall brand has been a global leader in the design and supply of purification components for almost half a century. We use leading-edge technology for managing hazardous and unstable discharge compounds for a broad spectrum of applications. Our diversified line of products includes can manage the aggregating, processing, and control of corrosive airstreams, mists, gases, and vapors. Our corrosion-resistant Centrifugal Exhaust Fans deliver performance, even in harsh conditions, while our wet scrubbers outperform others at the removal of debris from industrial exhaust streams. When you purify with HEE-Duall products, you can be assured that your emissions are cleansed effectively and efficiently.

Along with superior workmanship, we offer custom-created systems to meet your unique demands, no matter the size. HEE-Duall products are adaptable and capable of handling a broad range of jobs. Choose from our diverse line to find the equipment that is right for you, and we will be right beside you all the way. Our system experts offer extensive knowledge for each step of purification processes, and our customer service team is the best in the business. Deciding on the right purification system for your company is an important decision. But when you choose HEE-Duall, your choice is easy. Choose the most advanced, most reliable, and most carefully crafted equipment in the industry.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Low Total Cost of Ownership
  • High value and low maintenance
    • Premium and quality materials preserve the value in your fans and minimize the total cost of operation
    • Innovative airfoil wheel design delivers the highest level of performance and economical operation available in the industry
  • High reliability
    • Our HPC/HPCS fans are quality tested, exceeding the standards of:
      • ANSI (American National Standards Institute)
      • AMCA (Air Movement and Control Association International, Inc.)
  • Capacities from 125 to 165,000 CFM at static pressures to 18+ inch WC
  • Licensed to bear AMCA seal for air performance
  • Clockwise and counterclockwise rotation (interchangeable housing)
  • Eight discharge positions (can be rotated in field)
  • Standard arrangements 1, 8 (direct coupled) and 9 (belt driven) with others available
  • Maximum class III rotational speeds without distortion or separation
  • Shaft wheel assembly balanced statically and dynamically to ASTM specifications
  • Assembled fan tested for vibration and exceeds ANSI/AMCA standards

Centrifugal Compressor Silencer

Centrifugal Compressor Silencer

Burgess-Manning

Centrifugal compressors raise gas or air pressure, generating a lot of noise that requires a silencer for noise control. Our Burgess-Manning Centrifugal Compressor Silencers are designed for atmospheric intake, discharge and pressure discharge applications, and each silencer is engineered with an absorptive design to decrease high-frequency sound.

Each compressor silencer is engineered to deliver high reliability, efficiency and optimal performance with minimal airflow restriction and pressure drop, ensuring that you receive the solution to best fit your specific needs.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Low Total Cost of Ownership
  • Optimal performance with our absorptive design silencers for high-frequency sound reduction
  • Premium quality construction materials for high durability and reliably
  • Features
  • Standard connection sizes range from 1” to 66”
  • Model Designs up to 40dB

cdc™ Cartridge Dust Collector

cdc™ Cartridge Dust Collector

Flex-Kleen

Flex-Kleen cdc™ Cartridge Dust Collectors are specifically engineered for high collection efficiency, easy installation, and cost-effective, trouble-free operation. With over six-decades of experience and knowledge, we deliver reliable solutions designed for efficiencies up to 99.999%, and dependable service for the life of the unit. Our Flex-Kleen cdc™ Cartridge Dust

A global pioneer of technologies that help companies deal with emission control, Flex-Kleen products like cartridge dust collection systems are used around the world. Every day, companies use Flex-Kleen systems to control dust, recover valuable product, and manage pollution in their facilities. Success stems from passion; and we pour our hearts and souls into building innovative and dependable air control technology for our clients, and it shows. Choose Flex-Kleen to build the perfect solution for your problem, as we have since 1959.

Flex-Kleen systems are employed in some of the world’s state-of-the-art companies because they know our products, can and will, fill their needs. From concept to completion, we create systems to help you thrive, and our people are as dependable as our products. Let us install and maintain your Flex-Kleen dust collection system so you can focus on hitting your production and profitability targets. Let Flex-Kleen become a partner in your company’s success.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Low Total Cost of Ownership
  • Cost-effective and trouble-free operation
  • Small footprint design for maximum space usage
  • Reduced energy consumption, extended cartridge life, and high removal efficiencies due to our custom inlet design
  • Long service life
  • Minimal maintenance with quick cartridge change outs
  • Premium quality construction materials, including stainless steel
  • Systems range in size from 1,500 cfm to more than 60,000 cfm
  • Single door entry allows for more rapid inspection, maintenance and filter replacement
  • Full-length cartridge support and clamping system eliminates major source of dust leaks and ensures peak operating efficiency
  • Utilizes pulse venturis to ensure economical and effective cartridge pulsing
  • Utilizes pulse controls to minimize compressed air needs, maximize collector efficiency and reduce fan energy costs
  • Off-line pulsing prevents residual dust build-up
  • No internal ledges
CECO Environmental

APPLICATIONS

  • Food production
  • Dairy
  • Cereal
  • Spice
  • Grain
  • Chemical processing
  • Pharmaceuticals
  • Paints and pigments
  • Foundries