Market: Automotive

SAREX ® VG-SEP™

SAREX ® VG-SEP™

VG-SEP 200 Series Bilge Water Separator meets your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight especially on Yachts, Tugs and Towboats. The VG-SEP 200 uses coalescer first stage technology coupled with high tech replaceable filter elements to meet strict IMO MEPC.107(49) requirements for removal of emulsified hydrocarbons from bilge water to less than 15ppm.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Superior separation of emulsions in a compact design
  • Small footprint allows easy retrofit installation
  • Manual controls are simple and easy to operate
  • All units are pre-wired and pre-piped to facilitate easy installation and operation
  • IMO MEPC.107(49) type approved by USCG
  • Updated design with easily replaceable filter elements for ease of maintenance

Rolling Mill Fume Shield Hooding & Enclosure Systems

Rolling Mill Fume Shield Hooding & Enclosure Systems

Busch

Busch specializes in the design and supply of rolling mill hooding and enclosure systems. The Busch Fume Shield System is based on the 4-Cs design approach: Capture, Contain, Convey and Clean. Designed specifically for each unique rolling mill application, Busch Fume Shield™ Hoods work to provide a high-efficiency capture system. Computer model-based selection of optimum exhaust volumes provides the best possible capture.

To effectively contain emissions at the mill, the Fume Shield™ heavy-duty enclosures are tailored to the specific operation without sacrificing operator visibility or maintenance efficiency. Busch excels in difficult retrofit applications.

Request info  

FEATURES & BENEFITS

  • Drip-resistant construction to maximize sheet cleanliness
  • Internal fire system piping
  • Roll up under hood windows or doors to maximize capture efficiency
  • Hoods can be designed to retract or roll out of position if required

Rolling Mill Fume Exhaust PPS/DBF

Rolling Mill Fume Exhaust PPS/DBF

Busch

High Efficiency to Meet Stringent Regulations

The CECO Busch PPS/DBF were developed specifically to meet the increasingly stringent PM 2.5 environmental regulations and opacity control. PPS/DBF systems are especially well suited for Sendzimir-type Rolling Mill/Steel Cold Rolling Mills applications.

The quantity and particle size of liquid mist generated from rolling mills are a function of many variables, including coolant type, coolant flow rate, metal temperature, strip speeds, and saturation dew point. Rolling Mills have several mist generation mechanisms such as hydraulic pressure sprays and surface boiling followed by condensation. For this reason, the size and character of liquid particulate vary regularly.

A multiplicity of coolants and rolling methods mandate the use of multiple stages to achieve the lowest maintenance and highest possible collection efficiency. The PPS/DBF unit employs cleanable media, disposable media, or a combination of both. The PPS/DBF system is primarily used in Sendzimir Rolling Mill applications.

The PPS/DBF eliminator mechanically removes and drains liquid particulate using several mechanisms. Mists are removed by inertial impaction, direct interception, and Brownian capture depending on the droplet diameter and liquid density. The PPS/DBF unit provides removal of liquid particulate down to 0.3 microns.  The PPS/DBF mist eliminator offers maximum collection efficiency and the lowest opacity.

 

Accessories and Options

  • Support steel and platforms
  • Duct and transitions
  • Condensing coils for removal of EPA 202 Condensable Particulate Matter (CPM)
  • Drainage units
  • Alternate paint systems
  • Special gasket material
  • Volume control and CO2 containment dampers
Download our brochure  
Request info  

Rolling Mill Fume Exhaust

Rolling Mill Fume Exhaust

Busch

Busch builds fume exhaust systems for new and existing Rolling Mills. We offer a full range of oil mist, VOC, and particulate control technologies to meet regulatory standards virtually anywhere, on any type of Rolling Mill and coolant type whether it is water-based, oil-based, or oil/water emulsion-based. Click here for Fume Shield Brochure. Busch is recognized worldwide in the metals industry for providing the BACT (Best Available Control Technology) to capture, convey, and collect emissions from steel and aluminum rolling mills, including:

  • Rolling mill fume exhaust
  • Pickle line fume exhaust
  • Fume exhaust for process lines

We apply our decades of experience, with hundreds of successful installations across the globe, to optimize efficiency, performance, operating costs, and maintenance, while meeting strict environmental regulatory requirements worldwide.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Low Total Cost of Ownership – Minimized operating costs with our cost-effective Regenerative Thermal Oxidizer (RTO) AND high destruction efficiency of volatile organic compound (VOC) emissions
  • Reduced exhaust volume with our efficient hood designs, which decrease the size and cost of your fume system
  • Maximum productivity due to shortened downtime
  • Protection for your facilities and employee vehicles with our standard Stack Skimmer

RECYCLO-SEP®

RECYCLO-SEP®

Take the “Waste” Out of Waste Water With a RECYCLO-SEP® Recycler.

The RECYCLO-SEP® is a fully automatic wastewater recycling unit that processes dirty water created by cleaning equipment into water clean enough to be reused. The process flow rates are 6 GPM for the RECYCLO-SEP®.

Model 2000 and 12 GPM for the RECYCLO-SEP Model 2800.

The RECYCLO-SEP® has been proven especially effective in removing oils, grease, heavy metals, solids and other contaminants from water used in conjunction with pressure washers, steam cleaners or similar equipment. The system maintains a proper pH balance so that the recycled water may be safely reused. The RECYCLO-SEP® separator eliminates pollution problems by taking the waste out of waste water through recycling and reuse. The waste residue is reduced to a small, easily disposable semi-dry cake.

The principal system components consist of four vertically skid mounted tanks equipped with a feed pump, process pump, cartridge filter, three metering pumps, and associated valves and controls. The four processing tanks include the first stage tank, the flocculate tank, in which the majority of oil and solids are removed from the wastewater influent. The second stage, the separator tank, continued separation of remaining residual oils and solids. The third stage, the surge tank, provides a supply of clarified water for operation of the process pump. The fourth stage, the storage tank, stores the clean, processed water ready to be reused.

Request info  

FEATURES & BENEFITS

  • Provides easy and cost effective environmental regulations compliance
  • Prevents pollution from waste water discharge by converting existing open-loop operations into environmentally safe closed-loop systems
  • A simple, economical and reliable process for producing clean reusable water
  • Eliminates the need and cost of discharging waste water into a sewer and avoids the expense of transporting large volumes of liquid waste to a hazardous dump site
  • Saves water and reduces monthly water fees
  • Proven performance with state-of-the-art technology
  • Skid mounted for easy installation and operation
  • Enhances water conservation

Rectangular Splitter Attenuator

Rectangular Splitter Attenuator

Wakefield Acoustics design software allows custom selection of rectangular splitter attenuators to suit all air and gas movement applications.

PLANTROOM ATTENTUATION
From smaller attenuators for dust extraction plant, through to large attenuators on primary & secondary air fans used in power generation, we work closely with OEM’s, end users, contractors and consultants to address complex noise problems across a wide range of industries. Each attenuator is cost-effectively designed to meet the most demanding of customer noise specifications.

We offer several type of attenuator designs dependent on application and structural requirements, from light gauge screwed construction through to a heavy plate welded units.

All our attenuators have aerodynamic inlet fairings to reduce pressure loss, mineral wool infill protected by either a glass tissue scrim spun bound poly cotton or a woven glass cloth lining and a final layer of perforated sheet steel protection.

Inlet air filters are commonly used in conjunction with our range of rectangular splitter attenuators where a common filter bank is installed prior to the acoustic baffles. Access to the filters can be gained either through a side access door fitted into the filter plenum or via the end of the attenuator should space permit.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Melinex moisture resistant membrane for damp process air
  • Aerodynamic ‘V’ noses and ‘Bull’ noses to reduce pressure loss
  • Operating temperatures in excess of 250°C
  • Combined inlet filter silencers complete with filter slides and cells
  • Transition pieces
  • Weather cowls and louvres
  • VARIOUS FINISHES INCLUDE:
    • Polyester powder coated
    • Wet paint systems
    • Plastic coated steel

Pulse-Jet Dust Collectors

Pulse-Jet Dust Collectors

Flex-Kleen

Flex-Kleen Pulse-Jet Dust Collectors feature a compressed air cleaning design that can be customized to meet a wide variety of application requirements, including hazardous service and sanitary applications. Each unit is configured for optimal performance, delivering excellent filtration efficiency for product recovery systems, large bin venting applications, and general nuisance dust collection.

Each pulse jet dust collection system is custom designed to fit your unique application requirements, height limitations, and size restrictions, ensuring a durable and reliable solution with long service life.

Since 1959, Flex-Kleen has pioneered technologies that help companies deal with emission control. Around the world, facilities use Flex-Kleen technology like the Pulse-Jet dust collector to control dust, recover valuable product, and manage pollution. Our success is driven by passion for our work, and it shows. We pour our hearts and minds into creating innovative and reliable air control technology for our clientele. Let Flex-Kleen create the perfect solution that will meet your needs for years to come.

Cutting-edge companies trust products engineered and manufactured by Flex-Kleen to meet your requirements. From conception to creation, we develop the solution to help your business thrive. Our people are as focused and dependable as our products. So you can focus on hitting your production and profitability targets, call on Flex-Kleen install and maintain your dust collection system today. Let Flex-Kleen become a partner in your company’s success.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Low Total Cost of Ownership
  • Easy Installation with completely assembled units or welded sections for easy installation, plus quick-mounting air headers that are pre-wired and pre-piped
  • Energy-efficient with Smart Timer, reducing energy costs
  • Minimal maintenance due to no internal moving parts
  • Quick bag replacement design
  • Models available with bottom or (Patented Trap10™) top bag removal filters
  • Durable construction of welded 12 gauge hot rolled steel
  • Flanged air inlet, outlet and flanged dust discharge
  • 20” diameter top access port(s) to clean air plenum
  • Heavy gauge, NORYL™ venturis
  • Heavy duty, smooth galvanized cages
  • NEMA 4 (weathertight) electricals
  • Corner saddle supports-through 96 bag size
  • Six inch girth channel for continuous support – on sizes larger than 96 bags
  • Weatherproof walk-in clean air plenum (applied to top bag removal only)
  • Smart Timer™
  • Door sills have built-in 45P slopes
CECO Environmental

APPLICATIONS

  • Chemical processing
  • Pharmaceuticals
  • Mining and minerals
  • Coal and fly ash
  • Kilns
  • Boilers
  • Dryers
  • Mixers

Process Dust Collection Systems

Process Dust Collection Systems

Busch

Busch provides a wide range of dust collection systems for metal industry applications. Areas of expertise include:

  • Melt shop fugitive dust control
  • Torch cut off fume control
  • AOD vessel fume exhaust
  • Billet grinding fume collection
  • Plate grinding and polishing
  • Lead Industry dust and fume control
Download our brochure  
Request info  

FEATURES & BENEFITS

  • Pulse Jet Bag and Cartridge style collectors
  • A wide variety of materials of construction
  • Specialized hood designs
  • Slotted header travel duct and telescopic duct systems
  • HEPA after filters
  • PLC control systems

Process Air Gas Silencers

Process Air Gas Silencers

Typically utilized for rotary blades or centrifugal blowers, Wakefield Acoustics offers a wide range of custom-designed process air or gas silencers. Each silencer is cost-effectively designed to meet the most demanding of customer noise specifications.

We offer several type of absorptive silencer construction dependent on application and structural requirements, from light gauge welded construction through to heavy plate welded construction.

INDUSTRIAL SILENCER
Dependent upon the level of acoustic performance required silencers can be designed with an absorptive outer layer, thus not presenting additional pressure onto the system. Where a high level of noise reduction is required, a central acoustic pod would normally be installed.

Given the high heat levels which can sometimes be generated in process air and gas lines, the silencers would normally be treated with a heat-resistant paint finish after fabrication.

Wakefield Acoustics is able to undertake pressure testing of silencers to ensure compliance with project requirements.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Central absorptive pod for improved attenuation
  • Aerodynamic cones and hemi-spherical end caps to reduce pressure loss
  • Fully welded and gas tight
  • Melinex moisture resistant membrane for damp process air
  • Operating temperatures in excess of 250°C
  • Support feet, weather cowls and mesh guards
  • VARIOUS FINISHES INCLUDING:
    • Polyester powder coated
    • Various wet paint systems

PP Series – Polypropylene Electroplating Filter Systems – 2500/3500/4500/5500/7500 PP Series

PP Series – Polypropylene Electroplating Filter Systems – 2500/3500/4500/5500/7500 PP Series

Mefiag

Our Mefiag mid-range Polypropylene Electroplating Filter Systems units feature horizontal disc technology and capacities from 2,500 to 7,500 gph.

Since 1953, Mefiag has established its position as a global leader in the concept, development, creation, and distribution of unrivaled filter solutions. Our innovative filtration and pump solutions are the best in the anodizing, plating, and metal finishing industries. Our products perform beautifully in the harshest conditions. Simply put, Mefiag filters just work harder.

Mefiag products are the most versatile available. Along with our filtration systems for electroplating, our pumps and filters are used in numerous other applications around the world. Companies have come to rely upon our products to filter and dispose of harmful particulates. As our knowledge has expanded, one thing remains the same: our solid commitment to creating dependable, efficient products for our clients. Choosing a Mefiag filtration system for your business ensures your peace of mind.

At Mefiag, we are proud of our history. From our very first day, we remain committed to providing exemplary products for outstanding clients. If you strive for the best as hard as we do, then you can trust that Mefiag will bring your company the excellence and reliability it deserves. For optimum filtration solutions, choose Mefiag products.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Designed for the filtration of nickel, copper, and zinc electrolytes
  • Operating temperature to 180°F (82°C)
  • For plating tanks from 400 to 1,000 gallons (1818 to 4546 L) depending on the type of process
  • Can be supplied with horizontal discs or cartridges depending on the application
  • Low Total Cost of Ownership
  • Horizontal disc technology for greater surface area and maximum efficiency
CECO Environmental

APPLICATIONS

  • Automotive
  • Construction
  • Sanitary
  • Plating
  • Anodizing
  • Metal Finishing
  • Labs
  • Small Plating Tanks