Market: Food & Beverage

ULTRA-SEP™ Standard Oily Water Separator

ULTRA-SEP™ Standard Oily Water Separator

ULTRA-SEP™ is a two-stage system. The first stage efficiently removes free oil using our HELI-SEP® coalescing matrix separator, which is familiar to ship operators worldwide, with more than 20,000 in service around the world. The second stage SPIR-O-LATOR® technology provides a positive physical barrier to break emulsions and provide continuous less than 5ppm discharge. In fact, oil cannot penetrate the SPIR-O-LATOR®, so no oil will ever spill.*

*Using SPIR-O-LATOR® Correctly with proper set-up and maintenance.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Provides a positive physical barrier that minimizes the risk of accidental overboard discharge
  • Consistently produces clean water with less than 5ppm oil content GUARANTEED
  • Does not require chemicals, coalescing filters, clay or carbon fi lters replacements
  • Does not use hazardous chemicals
  • Does not produce biological waste by-product
  • Requires minimal operator involvement, saving time and labor cost
  • Easy to operate
  • Easy and economical to install
  • Available on single skid for new builds or modular Skids for Retrofits
  • All units are pre-wired, pre-piped and fully tested
  • IMO MEPC.107(49) Type Approval by USCG, ABS and RMRS
  • EC-MED Type Approval

ULTRA-SEP ® Compact Oily Water Separator G Series

ULTRA-SEP ® Compact Oily Water Separator G Series

ULTRA-SEP G Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. G Series provide the same Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger ULTRA-SEP systems but in a more compact size.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Superior separation of emulsions with SPIR-O-LATOR® Membrane Technology.
  • The Positive Physical Barrier to oil reduces risk of accidental overboard discharge.
  • Continuous discharge with less than 5ppm oil content.
  • Small footprint allows easy retrofit installation.
  • Manual controls are simple and easy to operate.
  • All units are pre-wired and pre-piped to facilitate easy installation and operation.
  • IMO MEPC.107(49) / EC-MED type approved by USCG and ABS
  • Updated design with improved pre-filter, simplifi ed hydraulic flow, easy to read gauges, motorized ball valves, electric fail-close overboard discharge valve and updated controls.

ULTRA-SEP ® Compact Oily Water Separator C Series

ULTRA-SEP ® Compact Oily Water Separator C Series

ULTRA-SEP C Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. C Series provide the same Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger ULTRA-SEP systems but in a more compact size.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Superior separation of emulsions with SPIR-O-LATOR® Membrane Technology. The Positive Physical Barrier to oil reduces risk of accidental overboard discharge.
  • Continuous discharge with less than 5ppm oil content.
  • Small footprint allows easy retrofit installation.
  • Manual controls are simple and easy to operate.
  • All units are pre-wired and pre-piped to facilitate easy installation and operation.
  • IMO MEPC.107(49) / EC-MED type approved by USCG and ABS
  • Updated design with improved pre-filter, simplified hydraulic flow, easy-to-read gauges and updated controls.

String Wound Cotton Depth Filter Cartridges

String Wound Cotton Depth Filter Cartridges

Mefiag

Mefiag String Wound Cotton Depth Filter Cartridges are fabricated of natural or synthetic fiber wound over a perforated plastic or metal core. The precision winding pattern covers the entire depth of the filter tube with hundreds of funnel-shaped tunnels which become gradually finer from the outer surface to the center of the tube and trap progressively finer particles as the fluid travels to the center. This allows much greater solids retention capacity than is associated with surface filter media of the same dimensions.

Mefiag provides top-quality pumps and filter cartridges for use in several applications. When dealing with corrosive and hazardous chemicals in various industries, experts trust Mefiag filter cartridges to be reliable and efficient as soon as they are installed. Mefiag sets the industry standard when it comes to dependability.

Mefiag products have an excellent reputation. If you need to filter acids, alkalis, or any other hazardous liquids, our cartridge filters will handle the job. The precision winding patterns of our String Wound Cotton Depth Filter Cartridges trap progressively finer particles as the fluids transverse toward the center of the cartridge. Businesses all over the world trust Mefiag cartridge filters.

Substandard filters can leave contaminants behind. Do not rely on inferior cartridges for your filtration needs. Go with Mefiag and get peace of mind. Our expert engineering staff will be there to help you make the right selection. Let Mefiag become a valuable part of your business today.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Standard sizes
  • Specifically designed for corrosion resistant service
  • High flow rate – low pressure drop
  • High efficiency
  • High solids holding capacity
  • Simple to use – easy to replace
  • Economical
  • Low Total Cost of Ownership
  • High flow rate – low pressure drop
  • Long service life – high solids holding capacity
  • Easy maintenance

Special Media Filtration

Special Media Filtration

Peerless Water

Special Media Filters are designed to reduce the contaminant concentrations in water to an acceptable level. Contaminants like Iron, Manganese, or H2S and heavy metals are oxidized and converted into an insoluble form and then filtered by the special media. Different media types are used depending on what kind of contaminants are removed.

Request info  

FEATURES & BENEFITS

  • Effective removal of wide range of pollutants
  • Manual and automatic operation
  • Simple operation and maintenance
  • Low operating costs
CECO Environmental

APPLICATIONS

  • Mining Industries water treatment
  • Industrial wastewater treatment
  • Manufacturing wastewater
  • Surface water and groundwater treatment
  • Process water treatment
  • Commercial & municipal water treatment

Spares and Replacement Silencers

Spares and Replacement Silencers

Burgess-Manning

With over 90 years of experience, we have thousands and thousands of silencers and filters in the field. For our Filter Silencers we have a regular after market for filters.

On the other hand, we have our silencers. These silencers hardly need replacement since there are no rotating parts. For these we get regular questions after 40 years if we can still replace or upgrade them.

To support our customers, we have a big range of silencers and filters in stock so that we can support our customers with quick turn around and supply of the required silencers. These silencers can be a 100% like for like requirements or our Application Engineering team can advise in upgrading the silencer to enhance acoustical or pressure drop performance.

We are setup to support you with 1 off silencers or orders of 100+ silencers. For our standard range of silencers all engineering is already completed and if not in stock the team can support you quickly to supply.

If you have any questions, please reach out to our dedicated aftermarket specialist to support you.

Download our brochure  
Request info  

Selective Non-Catalytic Reduction (SNCR)

Selective Non-Catalytic Reduction (SNCR)

Peerless Emissions Control

SNCR systems provide a low-cost technique to reduce NOx emissions by 30%–75% for boilers, furnaces and kilns.

The SNCR process involves injecting a reagent into the flue gas in the appropriate temperature window. The reagent reacts with NOx to form harmless nitrogen and water. The design, arrangement, and location of the reagent injectors are critical to the performance of the SNCR system. Our advanced technology utilizes variable droplet size control and automatic tilting injectors based on furnace temperature, to enhance the NOx reduction performance.

SNCR System Package

Our SNCR systems include reagent storage tanks, pumping and flow control, reagent injection systems, and a boiler control interface. CCA also provides experienced field engineers for optimizing the SNCR in conjunction with the combustion system and overall operations.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Injection of urea or ammonia (mixed with air and water) into furnace section of field erected boilers
  • NOx reduction reaction temperature window: 1,650–2,100 °F
  • Optimum injector locations determined by CFD modeling of furnace and exhaust gas profiles
  • CCA developed unique tilting injector design to improve efficiency and reduce equipment costs
  • Low total cost of ownership
  • High-efficiency NOx removal, providing 30%–75% reduction
  • Energy efficient
  • Easy to retrofit with minimal downtime

Selective Catalytic Reduction (SCR) – Peerless Emissions Control

Selective Catalytic Reduction (SCR) – Peerless Emissions Control

Peerless Emissions Control

As flue gases are combusted in gas turbines and process furnaces, nitrogen oxide (NOx) is formed. Our Selective Catalytic Reduction (SCR) system is a post-combustion NOx control technology, which injects an ammonia (NH3) based reagent into the flue stream to reduce NOx emissions by up to 95%.

Peerless Emissions Control patented Direct Injection SCR System is an innovative delivery, metering and injection system designed to reduce NOx and CO emissions using substantially less auxiliary load compared to a traditional SCR system.

Our Peerless Emissions Control brand TRIM-NOx® XL SCR injection module automatically injects a urea or ammonia-based reagent into the exhaust gas of a boiler, furnace, turbine or IC engine to reduce NOx emissions. Each module is engineered to optimize efficiency, performance and reliability while meeting stringent environmental standards.

Our SCR designs are engineered to optimize efficiency, performance and reliability, while meeting stringent energy standards. They are adaptable for a wide range of temperatures, exhaust flow conditions, and various types of fuel including:

  • Natural Gas
  • Refinery Gas
  • Coal
  • Biomass
  • Fuel Oils
Download our brochure  
Request info  

FEATURES & BENEFITS

  • Eliminates the need for vaporization equipment such and fans and electric heaters
  • CCA specializes in safer alternatives to ammonia (e.g., urea-based SCR)
  • Efficient NOx and CO reduction of 95%+
  • Reduces capital and operational costs by as much as 60%
  • Less equipment means less maintenance costs and reduced downtime

SAREX ® VG-SEP™

SAREX ® VG-SEP™

VG-SEP 200 Series Bilge Water Separator meets your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight especially on Yachts, Tugs and Towboats. The VG-SEP 200 uses coalescer first stage technology coupled with high tech replaceable filter elements to meet strict IMO MEPC.107(49) requirements for removal of emulsified hydrocarbons from bilge water to less than 15ppm.

Download our brochure  
Request info  

FEATURES & BENEFITS

  • Superior separation of emulsions in a compact design
  • Small footprint allows easy retrofit installation
  • Manual controls are simple and easy to operate
  • All units are pre-wired and pre-piped to facilitate easy installation and operation
  • IMO MEPC.107(49) type approved by USCG
  • Updated design with easily replaceable filter elements for ease of maintenance

Rolling Mill Fume Shield Hooding & Enclosure Systems

Rolling Mill Fume Shield Hooding & Enclosure Systems

Busch

Busch specializes in the design and supply of rolling mill hooding and enclosure systems. The Busch Fume Shield System is based on the 4-Cs design approach: Capture, Contain, Convey and Clean. Designed specifically for each unique rolling mill application, Busch Fume Shield™ Hoods work to provide a high-efficiency capture system. Computer model-based selection of optimum exhaust volumes provides the best possible capture.

To effectively contain emissions at the mill, the Fume Shield™ heavy-duty enclosures are tailored to the specific operation without sacrificing operator visibility or maintenance efficiency. Busch excels in difficult retrofit applications.

Request info  

FEATURES & BENEFITS

  • Drip-resistant construction to maximize sheet cleanliness
  • Internal fire system piping
  • Roll up under hood windows or doors to maximize capture efficiency
  • Hoods can be designed to retract or roll out of position if required