" " Trademark Archives - CECO Environmental

Trademark TRIM-NOX

TRIM-NOX®

To request proposals or purchase TRIM-NOX® anti-pollution devices, contact us using this form:

TRIM-NOX®

TRIM-NOx® technologies power operated anti-pollution devices that reduce or eliminate diesel fume exhaust emissions using injected reagents for use in diesel engines.

Additionally, TRIM-NOx® technologies are power-operated anti-pollution devices that reduce or eliminate diesel fume exhaust emissions using injected reagents for use in power plants, industrial plants, energy storage plants, boilers and other industrial applications, namely, air filtering installations.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark SPLIT FLAME

SPLIT FLAME®

To request proposals or purchase products containing SPLIT FLAME® technology, contact us using this form:

SPLIT FLAME®

Split Flame® Technology

For over twenty years, CCA has been an industry leader in the design, development, testing and manufacture of high efficiency, low emission combustion systems for industrial and utility boilers. Particular emphasis has been placed on the continued development of atomizers for heavy oil applications. With both very low NOx and opacity as the goals, two of the most difficult conditions to obtain simultaneously when firing heavy fuel oil, this product development has resulted in the patented Split Flame®atomizer. In addition to achieving the original goals, the atomizer can simultaneously operate at lower excess oxygen and carbon monoxide levels compared to other atomizers on the market today. Reductions in SO3 have also been measured using standard EPA test methods, resulting in lower visible opacity.

Assuring the highest level of quality control over the engineering and in-house manufacturing, CCA produces the Split Flame®atomizer for both steam and mechanically atomized oil systems, and has successfully applied this new technology on both wall fired and tangentially fired burners.

Split Flame® Atomizer & NOx Formation

The Split Flame® atomizer, in both the mechanically atomized and steam atomized designs, produces a divided spray pattern with both dense and lean phases, which in turn produces fuel rich and fuel lean zones. Providing fuel rich zones in the atomizing spray pattern can slow the formation of NOx. This spray pattern reduces the peak flame temperature and excess oxygen available for conversion of fuel nitrogen to Nox, thus reducing the formation of both thermal and fuel bound NOx. Each Split Flame® atomizer is tested in CCA’s laboratory using a Phase Doppler Particle Analyzer to ensure the optimum spray distribution and quality, mass ratio and pressure/flow relationship.

Steam Atomized Split Flame® Atomizer

The air or steam atomized, Split Flame® atomizer is of the internal mix design and comprises the spray plate, back plate or plug and retaining nut. Fuel enters the back plate or plug in the outer ring of holes, the oil changes direction by 90 at the outlet of the back plate and is directed towards the center of the plug through a series of radial slots where the oil is sheared by the atomizing steam passing through the inner ring of holes. Reversal of the oil and atomizing steam orientation is possible depending upon the application. The oil/ steam mix enters the mixing chamber of the spray plate and exits as angled sectors from graduated size orifices. The number of sectors is determined by the specific application. The Split Flame® atomizer can be designed as part of a new oil gun assembly, or it can be retrofitted to most existing oil guns.

Pressure Atomized Split Flame® Atomizer

The pressure atomized Split Flame® atomizer, which can be used on either the “once through” or simplex system or the spill return system, is of the pressure-atomized design and comprises a spray plate, back plate and retaining nut. On the simplex system, oil enters the back plate at high pressure through the outer ring of holes, changes direction by 90 degrees at the outlet of the back plate and is directed towards the center of the plug through a series of whirl slots. The oil enters a conical shaped whirl chamber with a high degree of rotational energy at the rear of the spray plate and exits through a circular orifice at the outlet of the cone. A slot milled at the outlet orifice creates the outlet divided spray pattern. The number of slots is determined by the specific application.

The spill return system operates with more fuel oil being flowed to the atomizer than is required for combustion. The oil enters and exits the outer ring of holes in the back plate, passes through the whirl slots into the conical spray plate chamber as with the simplex system. The excess oil not required for combustion returns through the inner ring of holes in the back plate, where a valve external to the oil gun controls the oil flow. The Split Flame® concept can be adapted to virtually any OEM oil gun.

Split Flame® Performance

The performance of the Split Flame® atomizer is unparalleled in industry today. Not only does it produce low NOx and low opacity simultaneously but also low CO and excess O2. The results shown below are from a 600 MW wall fired boiler and compare the retrofitted Split Flame® internal mix atomizer with the original OEM low NOx atomizer.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark TRAP 10

TRAP 10® Support Cage and Filter

To request proposals or purchase TRAP 10® support cages and filters, contact us using this form:

TRAP 10® Support Cage and Filter

CECO Environmental is a global leader in air quality and fluid handling serving the energy, industrial and other niche markets. Providing innovative technology and application expertise, CECO helps companies grow their business with safe, clean, and more efficient solutions that help protect our shared environment. In regions around the world, CECO works to improve air quality, optimize the energy value chain and provide custom engineered solutions for applications including oil and gas, power generation, water and wastewater, battery production, poly silicon fabrication, and chemical and petrochemical processing along with a range of others.

For industrial operations, CECO offers TRAP 10® support cages and filters industrial air purification equipment that can be rapidly installed and removed.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark MEFIAG

MEFIAG®

To request proposals or purchase MEFIAG® filter media or filter media housings, contact us using this form:

MEFIAG®

Int. Class 011- Mefiag® produces filter media housings and filter media used for industrial process solution filtering and industrial waste water filtering. 

Our Mefiag® Filtration brand is a world leader in the development, manufacture and supply of corrosion-resistant filters and pumps used primarily in the plating, anodizing, and metal finishing industries. Founded in The Netherlands in 1953, Mefiag® built its first filter unit for the electroplating industry almost 70 years ago.

Today, a large variety of filters and pumps are also available for other applications including the automotive, construction, and sanitary industries. The complete Mefiag’s line of filters – horizontal disc, cartridge, bag, carbon, pleated, and oil absorbing – are available in single chamber capacities ranging from 10 to 30,000 gph and include Sethco brand filters which are sold, manufactured and distributed by Mefiag® USA.

Mefiag® Produces:

  • Primary Products and Solutions
  • Compact Disc Filter Systems
  • Polypropylene Electroplating Filter Systems
  • Pleated Polypropylene Filter Systems
  • High-Capacity Electroplating Filter Systems
  • Oil Absorbing Filter Systems
  • Chromic Acid Disc Filter Systems
  • High Temperature Disc Filter Systems
  • Industrial Electrolyte Separation
  • Filter Media

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark FYBROC

FYBROC®

To request proposals or purchase FYBROC® pumps, contact us using this form:

FYBROC®

Int. Class 007-Centrifugal pumps. 

Our Fybroc® brand is the world leader in the design and manufacture of Fiberglass Reinforced Polymer (FRP) pumps. These pumps are available in different materials to provide excellent corrosion resistance for tough applications, including the pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids.

Steam Atomized Split Flame® Atomizer

The air or steam atomized, Split Flame® atomizer is of the internal mix design and comprises the spray plate, back plate or plug and retaining nut. Fuel enters the back plate or plug in the outer ring of holes, the oil changes direction by 90 at the outlet of the back plate and is directed towards the center of the plug through a series of radial slots where the oil is sheared by the atomizing steam passing through the inner ring of holes. Reversal of the oil and atomizing steam orientation is possible depending upon the application. The oil/ steam mix enters the mixing chamber of the spray plate and exits as angled sectors from graduated size orifices. The number of sectors is determined by the specific application. The Split Flame® atomizer can be designed as part of a new oil gun assembly, or it can be retrofitted to most existing oil guns.

Pressure Atomized Split Flame® Atomizer

The pressure atomized Split Flame® atomizer, which can be used on either the “once through” or simplex system or the spill return system, is of the pressure-atomized design and comprises a spray plate, back plate and retaining nut. On the simplex system, oil enters the back plate at high pressure through the outer ring of holes, changes direction by 90 degrees at the outlet of the back plate and is directed towards the center of the plug through a series of whirl slots. The oil enters a conical shaped whirl chamber with a high degree of rotational energy at the rear of the spray plate and exits through a circular orifice at the outlet of the cone. A slot milled at the outlet orifice creates the outlet divided spray pattern. The number of slots is determined by the specific application.

The spill return system operates with more fuel oil being flowed to the atomizer than is required for combustion. The oil enters and exits the outer ring of holes in the back plate, passes through the whirl slots into the conical spray plate chamber as with the simplex system. The excess oil not required for combustion returns through the inner ring of holes in the back plate, where a valve external to the oil gun controls the oil flow. The Split Flame® concept can be adapted to virtually any OEM oil gun.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark HYDRO-LANCE

HYDRO-LANCE® WET SCRUBBERS FOR PARTICULATE CONTROL

To request proposals or purchase HYDRO-LANCE® wet scrubbers, contact us using this form:

HYDRO-LANCE® WET SCRUBBERS FOR PARTICULATE CONTROL

The HEE-Duall HYDRO-LANCE® wet particulate scrubbing system is comprised of venturi impactors, liquid level controls, fans, recycle tanks, sludge drag-out chambers, mist eliminators, control panels, ducts, and hoods, all sold as a unit.

With Venturi scrubbers, the dirty gas entering a scrubber is forced at high velocity through a Venturi where it collides with scrubbing water. The tiny water droplets capture particles through impaction and diffusion. The dirty water is then removed in a cyclonic separator and discharged into a recycle tank. Some of the liquid is continuously purged to limit the solids concentration and allow recirculation back to the Venturi section.

However, Venturi scrubbers can experience pump failures, small orifice nozzle clogging, and material failures. To avoid these issues, we offer the Hydro-Lance® Wet Scrubber system, which combines proven Venturi collection methodology using with our HEE-Duall SAVe (Sub-merged-Air-Venturi) technology.

In terms of the principles of operation for the Hydro-Lance® Wet Scrubber, static pressure induced by an exhaust fan draws the sump water and dust-laden air stream into an inverted Venturi throat. Turbulent mixing of dust and small droplets form an agglomerate, which is returned to sump where water is reused and particulate matter settles out or is dissolved. Entrained mists and dust are collected on a chevron blade mist eliminator. The collected dust forms sludge at the conical bottom of the scrubber.

Ideal Applications Include:

  • Aluminum, titanium and other metal machining operations
  • Sodium Azide propellant manufacturing and handling
  • Pharmaceutical powders and dusts
  • Calcium chloride dusts
  • Hygroscopic dusts
  • Corrosive dusts
  • Food processing with clean in place (CIP) option
  • Bulk solids drying process
  • Battery lead pasting

 

Benefits

Hydro-Lance® Wet Particulate Scrubbers SAVe:

  • Capital cost – simple economical design
  • Replacement costs – corrosion resistant construction provides extended equipment life
  • Energy savings – no pumps
  • Maintenance savings – no moving parts, spray nozzles, or recirculation piping
  • Floor space – efficient geometry
  • Water savings – integral water saving sludge concentrator, the sump liquor need not be diluted

 

Features

  • Low energy use
  • Pre-engineered designs
  • Pilot testing available
  • Complete ventilation systems available
  • Replaceable Venturi throat
  • Available with CIP cleaning options
  • High efficiency >99% on very fine particulates
  • Higher efficiency designs available upon request
  • Corrosion-resistant

 

HEE-Duall HYDRO-LANCE® Wet Particulate Scrubbers

With nearly half a century in the industry, the CECO HEE-Duall brand is a global leader in the design and production of purification products. We create pioneering technology for dealing with hazardous and volatile exhaust compounds used in a variety of industries. Our broad range of components provides everything needed to manage the collection, handling, and control of corrosive airstreams, mists, vapors, and gases. Our Hydro-Lance® Wet Particulate Scrubbers efficiently remove contaminants that can damage equipment and the environment. When you count on HEE-Duall, you can be confident that your emissions are cleansed effectively and efficiently.

Along with our superior craftsmanship, HEE-Duall can customize a system to match your exact needs, large or small.Our products are adaptable and tough enough to handle any type of job. Search our impressive line to identify the equipment that is right for your task, and we will guide you through each step. Our expert staff offers a keen understanding of the purification process, and our customer support sets the industry gold standard. Selecting the right choice for purification equipment is a big decision. But when you choose HEE-Duall®, the choice is easy. Choose the most advanced, reliable, and carefully crafted equipment in the industry.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark LISP

LISP® Testing and Analysis

To request proposals or purchase LISP® testing and analysis solutions, contact us using this form:

LISP® Testing and Analysis

CECO Environmental is a global leader in air quality and fluid handling serving the energy, industrial and other niche markets. Providing innovative technology and application expertise, CECO helps companies grow their business with safe, clean, and more efficient solutions that help protect our shared environment. In regions around the world, CECO works to improve air quality, optimize the energy value chain and provide custom engineered solutions for applications including oil and gas, power generation, water and wastewater, battery production, poly silicon fabrication, and chemical and petrochemical processing along with a range of others.

For gas processing and transportation operations, CECO offers LISP® testing and analysis of in-line pressurized gas.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark MICRO NU

MICRO NU® Chemical Additives

To request proposals or purchase MICRO NU® chemical additives, contact us using this form:

MICRO NU® Chemical Additives

CECO Environmental is a global leader in air quality and fluid handling serving the energy, industrial and other niche markets. Providing innovative technology and application expertise, CECO helps companies grow their business with safe, clean, and more efficient solutions that help protect our shared environment. In regions around the world, CECO works to improve air quality, optimize the energy value chain and provide custom engineered solutions for applications including oil and gas, power generation, water and wastewater, battery production, poly silicon fabrication, and chemical and petrochemical processing along with a range of others.

For gas processing and transportation operations, CECO offers MICRO NU® chemical additives for liquids used in filters for removing pollutants and odors from gases.

For industrial gas processing and operations, CECO offers MICRO NU® chemical nutrient additive mix for addition to circulating water in biologically active filters for removing pollutants and odors from industrial gaseous effluent.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark N-SERT

N-SERT ® Aerosol Filters

To request proposals or purchase N-SERT® products or services, contact us using this form:

N-SERT ® Aerosol Filters

CECO Environmental is a global leader in air quality and fluid handling serving the energy, industrial and other niche markets. Providing innovative technology and application expertise, CECO helps companies grow their business with safe, clean, and more efficient solutions that help protect our shared environment. In regions around the world, CECO works to improve air quality, optimize the energy value chain and provide custom engineered solutions for applications including oil and gas, power generation, water and wastewater, battery production, poly silicon fabrication, and chemical and petrochemical processing along with a range of others.

The presence of organic materials can require additional attention to filter design to ensure that oil mist re-entrainment does not occur. Soluble salts can require wash systems for the fiber bed filters. The CECO engineering team can work with your engineers to develop the best wash system for each application. The presence of insoluble materials will cause filters to “blind” and pressure drop to spike. CECO can provide removable N-SERT® prefilters to extend fiber bed filter life in these installations.

CECO provides these life extending filters for a variety of industries.  Below is a list of the industries, operations, and applications that are best supported by the N-SERT® Aerosol Filters. 

For chemical operations, CECO offers N-SERT® Aerosol Filters to extend fiber bed filter life.

For printing operations, CECO offers N-SERT® Aerosol Filters to extend fiber bed filter life.

For plastics manufacturing and operations, CECO offers N-SERT® Aerosol Filters to extend fiber bed filter life.

For food processing operations, CECO offers N-SERT® Aerosol Filters to extend fiber bed filter life.

For textile manufacturing and operations, CECO offers N-SERT® Aerosol Filters to extend fiber bed filter life.

For veneer manufacturing and operations, CECO offers N-SERT® Aerosol Filters to extend fiber bed filter life.

For waste incineration and other operations, CECO offers N-SERT® Aerosol Filters to extend fiber bed filter life.

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697

Trademark Peerless Mfg Co

PEERLESS Mfg. Co.®

To request proposals or purchase Peerless Mfg. Co.® technologies, contact us using this form:

Int. Class 011 – Peerless Mfg. Co.® produces filtration and separation equipment, namely, gas and liquid separation systems, odorization systems, and pulsation dampening systems comprised of line separators, vertical gas separators, horizontal gas separators, mist extractors, dry scrubbers, filter-separators, absolute separators, pulsation dampeners, combination dampener separators, and O-ring closures.

Additionally, Peerless Mfg. Co.® creates selective catalytic and non-catalytic reduction systems and environmental and emission control systems, comprised of ammonia flow control units, ammonia injection manifolds, ammonia injection grids, transition ducting, external and interconnection piping, catalysts, ammonia flow control units and storage tanks; separators; filtration and separation equipment, namely, extractors, dry scrubbers, pulsation dampeners, combined dampeners and separators, blowdown silencers, and O-ring closures; inlet air filters and separators for gas turbine and HVAC installations; by-pass, wick and injection type odorizer installations and parts and fittings therefor; cyclones, vanes, separators, filters and combined separators and filters, all for the removal of solids and liquids from gas streams in applications such as gas transmission, oil refining, chemical processing, compressing stations, power plants, nuclear plans, and marine intake; industrial air and water filter machines, namely, environmental pollution control equipment used in the abatement of NOX discharge from power plants and other industrial combustion equipment. 

Contact Us

North and South America
14651 Dallas Parkway
Suite 500
Dallas, TX 75254
USA Phone: 214-357-6181
Fax: 214-351-0194
Toll Free: 800-333-5475

Europe
Industrieweg 59
P.O. Box 65
8070AB Nunspeet
The Netherlands
Phone: +31 341 252 635
Fax: +31 341 262 112

Middle East and Africa
AU Gold Tower, Floor 28, Office A Cluster I
Jumeirah Lake Towers
PO Box 62435
Dubai, United Arab Emirates
Phone: +971 (0) 4434 0004
Fax: + 971 (0) 4434 0666

Asia
Suite 810, Building B International Venture Park
No. 2679 Hechuan Road
Minhang District
Shanghai, 201103
China
Phone: +86-21-58248000
Fax: +86-21-58249697