Dampers redirect the flow of hot gas from one outlet to another. They modulate gas flow, divert gas flow, and isolate equipment from gas flow.
Solutions designed to reduce NOx emissions include SCR and SNCR. SCR (Selective Catalytic Reduction) is a means of converting NOx with the aid of a catalyst into diatomic nitrogen (N2), and water (H2O). In contrast, with
SNCR (Selective Non-Catalytic Reduction), either ammonia or urea is injected into the boiler to react with the nitrogen oxides formed in the combustion process.
Dust Collectors are technologies used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas.
Manufacturing plants and other industrial facilities usually have industry-specific and application-specific requirements for their fume capture and exhaust. These requirements necessitate custom, turnkey solutions that
meet or exceed stringent environmental standards.
Cleaner burning than other fossil fuels, the combustion of natural gas produces negligible amounts of sulfur, mercury, and particulates. However, natural gas does produce nitrogen oxides (NOx), which contributes to smog.
CECO provides a wide range of technologies to enable air and noise emissions management in gas-fired power plants.
Industrial Cyclones are a technology that uses cyclonic separation as its method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation.
Manufacturing plants and other industrial facilities usually have industry-specific and application-specific requirements for their process air ventilation, fume capture and exhaust, product recovery, and emissions mitigation.
Cooling or drying moving metal strips more quickly and efficiently is a primary objective of primary metal manufacturers. Computer design and selection, coupled with extensive field verification, can ensure the accurate
prediction of the cooling performance for each application.
CECO produces mist elimination products including fiber bed filters and mesh pad mist eliminators that are used to trap, collect and remove liquid mist and soluble solid particulate suspended in air or other gas streams.
An oxidizer is an air pollution control technology that decomposes hazardous gases at a high temperature and releases them into the atmosphere.
Scrubbers are pollution control devices that use liquid to wash unwanted pollutants from a gas stream, or that inject a dry reagent or slurry into a dirty exhaust stream to "wash out" acid gases.
Separators are pressure vessels used for separating a well stream into gaseous and liquid components. CECO’s Peerless brand products and solutions fit within the classification of Separators.
Industrial silencers are used to control the noise associated with a wide range of industrial processes. CECO’s Burgess-Aarding brand products and solutions fit within the classification of Silencers.
Some applications are perfect for duct that fits together quickly, without the need for custom sheet metal fabrication. For these applications, we offer clamp-together duct and flanged duct (duct with angle rings).
A VOC (volatile organic compound) Concentrator is an air pollution control technology used in applications that involve a combination of high volume of air with low concentration of solvents.
Our HEE-Duall brand Bio-Reaction Biogas Oxidizers are reliable and durable systems that utilize three stages of biological activity to digest variable concentrations of vapor phase volatile organic compounds (VOCs) and odorous compounds: Bio-Trickling chamber, Bio Matrix chamber, and an extended, aerated, waste water treatment chamber.
Fiberglass Reinforced Plastic (FRP) pumps are available in different materials to provide excellent corrosion resistance for tough applications, including the pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids.
Cyclones are a technology that uses cyclonic separation as its method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation.
Expansion Joints are designed to safely absorb the heat-induced expansion and contraction of construction materials, to absorb vibration, to hold parts together, or to allow movement.
Natural gas pipelines require a wide range of compact, high-efficiency filtration and separation equipment to filter the natural gas entering the compressor stations. Technologies are needed to separate gas from liquids,
to remove particles from gas, and to remove droplets from gas.
In nuclear power plants, both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition, technologies
are required to remove water condensed from the process steam to maximize thermal efficiency and minimize erosion/corrosion of steam loop piping.
CECO offers high-quality chemical process and high temperature metallic centrifugal pumps that are manufactured in a variety of metals to handle a broad range of high temperature and chemical process applications.
Fiberglass Reinforced Plastic (FRP) pumps are available in different materials to provide excellent corrosion resistance for tough applications, including the pumping of acids, brines, caustics, bleaches, solvents, seawater
and a wide range of waste liquids.
CECO offers a complete line of horizontal and vertical corrosion pumps with capacities to 250 GPM. Manufactured from both high-strength thermoplastics and stainless steel, our products are particularly suited for use
in the metal finishing and electronics industries.
CECO is a world leader in the development, manufacture and supply of corrosion-resistant filters and pumps used primarily in the plating, anodizing, and metal finishing industries.
Efflorescence, the separation of waste products from industrial electrolytes and liquors requires unique engineering.
Our CECO assessments help solve these ever changing problems and provide an implementation plan that our customers can follow for success.
You have researched and planned for the new operational asset for your facility. Ensure this new investment is commissioned appropriately with the use of CECO commissioning services.
With decades of experience and millions of hours of engineering excellence, we have qualified, experienced multi-discipline resources to execute projects from Concept to Commissioning. Our capability is strengthened by in-house infrastructure for design and fabrication of equipment and custom engineered packages.
Let CECO help with the installation of your new asset. We partner with you to provide technical support and engineering expertise.
Genuine parts from CECO are built with the same quality standards as the original equipment. CECO genuine parts are designed to the original equipment standards to maximize the efficiency of operation and provide maximum
Whether you have just invested in a new piece of equipment or you are operating an existing asset, a CECO preventative maintenance service plan will increase the reliability and reduce the risk and costs of unplanned
maintenance and equipment downtime.
CECO has thousands of operational assets around the world today that rely on CECO services for asset management. Our experienced and trained service technicians are available for a variety of different service offerings.
Whether you have a new production requirement, you are trying to extend the lifecycle of your asset, or you are looking for improved operational efficiency, CECO can provide a retrofit to your existing unit to fit your
Depending upon the responsibilities of the operators at our customer’s facilities, CECO training offers a variety of solutions. We listen to your requirements and design a training solution for your needs.
CECO Aarding’s customized solutions are based on a proven track record in the design, engineering and manufacturing of Gas Turbine Exhaust Systems, De-NOx solutions such as Selective Catalytic Reduction (SCR) for the
reduction of air pollution, Dampers, and Expansion Joints.
CECO Burgess-Aarding’s silencers are best suited to the prevention or reduction of noise from fixed installations, as opposed to mobile (over the road) applications.
CECO Peerless is an experienced and reliable global leader in designing and supplying a wide range of compact, engineered, high-efficiency, processing, separation and filtration equipment. Founded in 1933, Peerless primarily
serves the oil and gas production, gas pipeline transportation and power generating industries around the world.
CECO Emtrol-Buell represents the culmination of more than 120 years of advancement in gas solids separation technologies by two of the world's most recognized names in Fluid Bed Cyclone Systems.
CECO CCA, founded in 1980, is a global industry leader in the engineering, design, development, testing, and manufacturing of high-efficiency, low-emission combustion systems for industrial and utility boilers.
CECO Effox-Flextor is the world leader in the design and manufacturing of heavy-duty utility and industrial dampers and expansion joints for use in solid fuel combustion and exhaust systems, with more than 50 years of
Since 1988, CECO Adwest has provided cost-effective thermal oxidizers and catalytic oxidation solutions for the abatement of volatile organic compounds (VOCs), gaseous air toxic fumes, and odors from chemical, hydrocarbon, and acid
gas process streams.
CECO Busch International brand has provided global leadership in the design and installation of custom clean air solutions to heavy industry, including fume collection technologies and air quality systems, for more than
CECO Fisher-Klosterman has been supplying custom-designed air pollution control and product recovery equipment since 1948. Our product line includes high-efficiency to ultra-high efficiency Industrial Cyclones and Venturi scrubbers.
CECO Flex-Kleen exemplified engineered solutions for a wide variety of dust collectors and particulate control applications and environments for more than 50 years. It has been a leading supplier of dry particulate collection
solutions and systems for process dust control, product recovery, nuisance dust collection, and air pollution control since 1959.
For more than 40 years, CECO HEE-Duall has been a leading global supplier of wet scrubbers, and custom-designed systems and solutions for the collection, handling, ventilation and control of corrosive air streams, including
corrosive gases, mists, vapors and particulates.
CECO KB Duct is a leader in standard, modular ducting systems (clamp-together and flanged), individual components and application-specific duct solutions for industrial dust, fume, mist and air handling systems. KB Duct
began as a part of CECO Kirk & Blum brand, which has been in operation since 1907.
CECO Kirk & Blum is one of the largest and most experienced custom sheet metal and industrial ventilation fabricators in the United States. Founded in 1907, Kirk & Blum is a true pioneer in the market of filtration,
fabrication, and installation of the products to meet any air emission compliance standards.
CECO AVC has been a leader in building voltage controllers, rapping systems, replacement parts for Electrostatic Precipitators (ESPs), and performing maintenance support functions for customers since 1977. The primary
industries that we serve include power (coal-fired, wood-fired and biomass), petroleum refining, chemical product manufacturing, and minerals/cement production.
Our CECO Filters brand specializes in manufacturing and designing mist elimination products and ‘Turnkey’ package systems. We have been a pioneer, innovator and global leader of candle filter mist elimination technology for more than 50 years.
CECO Dean is recognized worldwide for its high-quality chemical process and high temperature metallic centrifugal pumps. These pumps are manufactured in a variety of metals to handle a broad range of high temperature
and chemical process applications.
CECO Fybroc is the world leader in the design and manufacture of Fiberglass Reinforced Plastic (FRP) pumps. These pumps are available in different materials to provide excellent corrosion resistance for tough applications,
including the pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids.
CECO Sethco offers a complete line of horizontal and vertical corrosion pumps with capacities to 250 GPM. Manufactured from both high-strength thermoplastics and stainless steel, Sethco products are particularly suited
for use in the metal finishing and electronics industries.
CECO Mefiag is a world leader in the development, manufacture and supply of corrosion-resistant filters and pumps used primarily in the plating, anodizing, and metal finishing industries.
Please select one of the following brands for more information:
CECO FybrocCECO DeanCECO Sethco