Aarding
LEISTUNGSSTARKE UND LANGLEBIGE INDUSTRIELLE EMISSIONSKONTROLLE
Industry-leading gas turbine exhaust system supplier for power and petrochemical plants.
Gas Turbine technology is a critical part of the puzzle in the energy transition. Gas Turbines stabilize the grid so that fluctuating renewable energy sources like solar and wind can be utilized to their maximum capacity. In addition, Gas Turbines can now work on hydrogen as well.
Aarding technology supports our customers in handling the highly turbulent and high-temperature flows of the Gas Turbine and directs them to a safe location. Designing systems that can handle turbulent flows of up to 730°C requires a unique skill set and, more importantly, experience. We have experience with all downstream exhaust parts, including and after the Gas Turbine. This includes the diffuser duct, diverters, silencer ducts with our patented Flue Gas Silencers, and complete stacks.
We often work with our other CECO brands, like Peerless, to combine their unique emission control technologies with our Industrial Acoustics and Gas Turbine Exhaust equipment in one complete package. Together, we have supplied the world's largest HOT SCR installed system.
The history of Aarding dates back to 1960. Originating from a company that supplied liner systems for HRSG boilers to a company that custom-designs complete Gas Turbine exhaust systems. Our stacks are installed on all six continents and are a central component of Gas Turbines for all leading suppliers. We offer sizes ranging from small 20MW Gas Turbines up to some of the largest Gas Turbines. For the smaller Gas Turbines, Aarding has developed a standard range of simple cycle stacks to provide fast and cost-effective solutions. However, most systems are fully customized to customer-specific requirements that meet the most stringent noise requirements and other local conditions.
Energy efficiency and recycling waste streams in petrochemical plants are high on the agenda of all companies for sustainability practices. Our technology can enable this by directing the Flue gasses from a Gas Turbine to another process to re-use the heat (a form of product recovery) and optimize the plant's energy balance.
Aarding serves Gas Turbine manufacturers (OEMs), boiler suppliers, EPC contractors and end users. Headquartered in the Netherlands, with additional offices in the United States and Singapore, Aarding serves customers in all time zones and locations around the globe. With our innovative solutions, we can support our customers to become more QUIET & CLEAN.

Schalldämpfer der Marke Aarding eignen sich am besten für die Verhinderung oder Reduzierung von Geräuschen bei festen Installationen im Gegensatz zu mobilen Anwendungen (über die Straße). Die Geräuschquelle könnte von einem Einlass oder Auslass eines Motors, Kompressors, Gebläses, einer Vakuumpumpe, einer Turbine, einer Entlüftung/Abblasung, eines Steuerventils oder eines Entlastungsventils stammen. In vielen Fällen werden unsere Schalldämpfer dort eingesetzt, wo der Prozess am Schalldämpferauslass zur Atmosphäre offen ist, aber wir haben zahlreiche Designs, die gleichermaßen gut für prozessinterne (geschlossene) Systeme geeignet sind.
INDUSTRIE IM BLICKPUNKT

Fossile Energiequellen wie Öl, Kohle und Erdgas sind nicht erneuerbare Ressourcen, die durch das Absterben prähistorischer Pflanzen und Tiere entstanden und nach und nach von Gesteinsschichten begraben wurden. Über Millionen von Jahren entstanden verschiedene Arten von fossilen Brennstoffen – je nachdem, welche Kombination von organischem Material vorhanden war, wie lange es vergraben war und welche Temperatur- und Druckbedingungen im Laufe der Zeit herrschten.
Heutzutage bohrt oder baut die Industrie für fossile Brennstoffe nach diesen Energiequellen, verbrennt sie zur Stromerzeugung oder veredelt sie, um sie als Brennstoff zum Heizen oder für den Transport zu verwenden.
Die Marke Aarding hat Erfahrung mit kundenspezifischen Emissionsmanagementlösungen für Erdgas- und petrochemische Verarbeitungsanlagen. Unsere Mission ist es, saubere, sichere und effiziente Energietechnologien bereitzustellen.
Bei der Entwicklung einer Lösung für unsere Kunden berücksichtigen wir jeden Aspekt eines Projekts, von der Lieferkette über den Preis bis hin zur Fähigkeit, die erforderlichen Spezifikationen zu erfüllen. Es ist uns wichtig, dass die Implementierungslogistik, die Installation vor Ort und die laufende Wartung so reibungslos wie möglich ablaufen und erkennen, dass die Art und Weise, wie wir jedes Projekt gestalten, einen direkten Einfluss auf den Erfolg hat.
Unsere weltweite Fertigung und Präsenz auf drei verschiedenen Kontinenten ermöglichen es uns, die spezifischen Anforderungen jedes Kunden zu erfüllen, unabhängig davon, ob es um Kosten, schnelle Lieferzeiten oder einen minimalen CO2-Fußabdruck geht.
KONTAKT
*Benötigte Felder
„*“ zeigt erforderliche Felder an