Gore
Sectioned
For heavier service requirements,
K&B manufactures elbows in
20 to 10 gauge depending upon requirements.
Available in either galvanized
or black sheet steel. All seams
welded or brazed. Sizes range from
4" through 48" diameter.
Built standard on 30°, 45°,
60°, and 90°, but other
angles, sizes, and gauges also
available on order. Elbows can
also be fabricated from 3/16" and
heavier material. Larger diameter
are also available. |
  |
| CENTERLINE RADIUS (CLR) |
| LONG RADIUS (LR) |
SHORT RADIUS (SR) |
| DIA. |
CLR |
PCS |
DIA. |
CLR |
PCS |
| 3"-14" |
2 1/2 x DIA |
5 |
3"-16" |
1 1/2 x DIA |
5 |
| 15"-16" |
2 x DIA |
5 |
--- |
--- |
--- |
| 17"-47" |
2 x DIA |
7 |
17"-47" |
1 1/2 x DIA |
7 |
| 48" & UP |
1 1/2 x DIA |
7 |
48" & UP |
1 1/2 x DIA |
7 |
|
Heavy
Gauge
These airtight elbows with totally smooth interior
are superior to both machine made or conventional heavy
gauge gore sectioned elbows. They are ideally suited
for use in handling abrasive materials or in applications
with high dust loading, such as that encountered in
foundry, grain, tobacco, glass, chemical, and paper
industries. Also, they are more economical than gore
sectioned elbows. |
  |
| CENTERLINE RADIUS (CLR) |
| DIA. (O.D.) |
GAUGE |
CLR |
| 3 |
16 |
7.5 |
| 4 |
16 |
10.0 |
| 5 |
14 |
12.5 |
| 6 |
14 |
15.0 |
| 8 |
14 |
20.0 |
| NOTE: 7" dia. elbows are
available in Gore Type only. |
|
Flat
Back
For abrasive service, the K&B
flat back elbow has a replaceable
wear section. For special applications,
the wear section is lined with
3/16" rubber. Built in black
steel only 4" through 48" diameter. |
 |
| DIA. |
R |
L |
BODY GA. |
WEAR PLATE GA. |
| 4"-7" |
2 1/2 x DIA |
2 x DIA |
14 Ga. |
3/16" Plate |
| 8"-14" |
2 1/2 x DIA |
2 x DIA |
12 Ga. |
1/4" Plate |
| 15"-20" |
2 x DIA |
1 1/2 x DIA |
12 Ga. |
1/4" Plate |
| 21"-48" |
2 x DIA |
1 1/2 x DIA |
12 Ga. |
3/8" Plate |
|
